APPLYING WALL DECALS — QUICK & EASY

Whether this is your first time applying wall decals or you’ve done it before, the process is designed to be simple.
Just remember: peel and stick!

Video tutorial:
https://www.youtube.com/watch?v=p0HVIDO6Z1A&t=143s

Approved Surfaces

Our wall decals can be applied to the following smooth surfaces:

• painted walls
• ceramic tiles
• wood
• metal
• plastic
• glass / mirrors

For best results, the surface must be smooth, dry and flat.
Textured or rough surfaces will prevent proper adhesion.

Please note: some specialty wall paints (such as “wash & wear”, Teflon-coated or very low-VOC paints) may reduce adhesion performance.

Surface Preparation

Before installation, make sure the surface is free from dust, dirt and grease.

Clean the wall using a soft sponge or a lint-free cloth with mild soap if necessary. Allow the surface to dry completely before applying the decal.

The decal should adhere directly to the wall surface — dirt particles trapped underneath may cause lifting or poor adhesion.

How to Apply Wall Decals

Choose the desired location and carefully plan the placement.
Cut around individual elements if needed to make positioning easier.
Slowly peel back one corner of the backing paper and fold back approx. 10–15 cm (4–6 inches).
Position the exposed adhesive area on the wall and hold it in place.
Gradually remove the remaining backing paper while smoothing the decal onto the surface.
This step is easier with two people.
Remove any air bubbles by gently smoothing with a credit card or squeegee, working from the center outward.

Removing Wall Decals

To remove the decal, gently peel it off starting from one corner.

If resistance occurs, use a hairdryer on a warm setting to slightly heat the adhesive. Once the edges begin to lift, slowly and carefully remove the decal.

Important Notes

• Not a toy: wall decals are decorative products. To prevent accidental removal, place decals out of children’s reach. Avoid positioning them directly above a child’s bed.
• Before purchasing or installing, always ensure the wall is smooth, dry, flat and not freshly painted.
• In rare cases, minor wall marks may occur during application or removal, depending on the surface condition and paint type.

Now you’re ready to decorate — enjoy your Eudajmonia wall decals!